Preguntas frecuentes

I+D
- Q
  
  How can I measure the temperature of the lens / reflector in my lamp?
  
  A
  
  Please read Thermal Measurement Instructions for Lenses and Reflectors
- Q
  
  Where can I get PCBs for LEDiL optics?
  
  A
  
  You can get LEDiL compatible PCBs from many of our distributors. For PCB design files please contact tech support
- Q
  
  My preferred LED/Optic combination is not listed on the LEDiL website. How can I get information about compatibility?
  
  A
  
  Please contact tech support
- Q
  
  Do lenses designed to be made of PMMA work if made of polycarbonate and vice versa?
  
  A
  
  Difference in the refractive indexes of PMMA and polycarbonate may cause the light pattern to change. The optical performance of lenses made of alternative materials should be simulated and evaluated case by case. For more information please contact tech support
- Q
  
  Can an injection mold designed for PMMA or polycarbonate be used for silicone and vice versa?
  
  A
  
  No. The equipment and processes for manufacturing silicone lenses are very different from those used for thermoplastics.
- Q
  
  Can LEDiL standard optics be modified to meet customer specific requirements?
  
  A
  
  In general, yes. Finding a cost effective solution requires knowledge of both the product and tooling. Any modifications should be made in close cooperation with LEDiL R&D. Please contact your local LEDiL sales agent or tech support for more information.
CALIDAD
- Q
  
  Who do I contact if I have an inquiry regarding quality?
  
  A
  
  Please contact our quality department
- Q
  
  Where can I find quality certificates, RoHS and REACH compliance for LEDil products?
  
  A
  
  Please see Support / Certificates
- Q
  
  How do I avoid cracks in LEDiL products?
  
  A
  
  Please ensure that chemicals are compatible with the material and don’t outgas any volatile organic compounds.
- Q
  
  Why does a lens, reflector or base part deform or melt?
  
  A
  
  Thermal management may not be sufficient or the parts aren’t clean enough and there is absorption in the high radiant flux area. Please follow the material’s maximum recommended service temperature.
- Q
  
  How can I prevent the lens cracking around the screw tower?
  
  A
  
  Please ensure that your heat sink screw holes are within tolerances and assembly has been carried out according to the instructions. Also check that screw specifications are in line with our recommendations in the Installation Guide page 24.
VENTAS
- Q
  
  I noticed this product is tagged EOL (End of Life). Will there be a replacement as we are designing a new product based on this item.
  
  A
  
  As part of our continuous improvement process we discontinue certain products. We therefore advise against using discontinued products in future designs.
- Q
  
  I am organising lighting workshops for schools and would like permission to use some of your illustrations for teaching students about the characteristics of LED lighting. Is it possible to use some of your illustrations with credit to LEDIL on each diagram used?
  
  A
  
  All information in lediloptics.cn is in the public domain and can be used with reference to LEDiL.
- Q
  
  Where can I buy your products?
  
  A
  
  Please contact your nearest/local LEDiL distributor or sales agent
- Q
  
  Can you send your product catalogue and price list?
  
  A
  
  You can download our latest product catalogue here. For information about prices please contact our sales department.
- Q
  
  Is it possible to get samples of your products?
  
  A
  
  Yes. Please contact your local sales agent for more information.
- Q
  
  Where can I get PCBs for your products?
  
  A
  
  We can provide Gerber files and PCB samples for testing purposes. Please contact our tech support
- Q
  
  I need to have the Gerber file of the PCB. Can you provide it?
  
  A
  
  Yes. Please contact our tech support and they will send you the relevant Gerber files.

<<<<<<< HEAD ======= >>>>>>> e31da9cafd2f6f37ea7ef88f6537325fed62744c

PREGUNTAS FRECUENTES